Lumen output up to 20.000lm, with a SMART solutions possibility.

Luminaire is produced in 3 sizes, depents on power:

Body is made from aluminium die-cast body (finished in RAL7046)

- NODN...S - small body (565x210mm)

- NODN...M - medium body (655x260mm)

- NODN...L - large body (795x305mm)

Luminaires also offer a different smart solution, for example:

The NODNS050KC42W/BIREG/ASTRO luminaire is a bi-chromatic LED street light with autonomous time-based control that, in addition to standard nighttime power reduction, also enables automatic switching of light colour; in a typical setup it operates in the evening at full or higher output with a cooler colour temperature (e.g. 4000 K) to ensure good visual conditions and traffic safety, while during deep night hours (e.g. 22:00–4:00) it simultaneously reduces output and switches to a much warmer colour (e.g. 2200 K), which is more comfortable for residents and has a lower environmental impact; the solution uses two independent LED modules with fixed CCT values selectable from the range 5700–1800 K, so it is not a tunable-white system but a discrete two-colour switching concept, with switching times, output levels and colour combinations programmable and identified in the luminaire code in the same way as standard REG versions.

The luminaire can also be equipped with several types of smart solutions:

• ND (REG) – basic version without a ZHAGA connector;
  ND – non-dimmable version,
  REG – version with the option to activate the ASTROdim function (autonomous dimming).

• ZH/ASTRO – luminaire prepared for a sensor (equipped with a ZHAGA connector and D4i driver); the connector is wired, the driver is connected and activated for the TRIDONIC ASTRODIM function (22:00–04:00, 50%).

• ZH/REG – luminaire prepared for a sensor (equipped with a ZHAGA connector and D4i driver); the connector is wired, the driver does not have the ASTROdim function activated and therefore operates only in ON/OFF mode.

• ZHS – luminaire equipped with a twilight sensor installed in the ZHAGA connector (on the top of the luminaire); TRIDONIC D4i driver, TRIDONIC SSI 31 PC sensor; sensor settings are configured via the driver using NFC.

• ZHMS – luminaire equipped with a motion and light sensor installed in the ZHAGA connector (on the underside of the luminaire); TRIDONIC D4i driver, TRIDONIC SSI 31 PIR sensor; sensor settings are configured via the driver using NFC.

• ZHMSC – luminaire equipped with a motion and light sensor installed in the ZHAGA connector (on the underside of the luminaire); TRIDONIC D4i driver, TRIDONIC SSI 31 PIR sensor, plus a TRIDONIC CIS 31 RF communication unit installed on the top of the luminaire; sensor configuration is carried out using a TRIDONIC dedicated programmer.

• ZHBT – luminaire equipped with a Bluetooth twilight sensor installed in the ZHAGA connector (on the top of the luminaire); TRIDONIC D4i driver, TRIDONIC basicDIM Wireless Outdoor sensor; sensor settings are configured via a mobile application using Bluetooth.

• BI – option for switching between two correlated colour temperatures (CCT).